Hoophouse
  • Conversion Journal

Post 2 - Demolition Day

10/25/2015

Comments

 

Start of day 1

Picture

End of day 1

Picture
Goals for the day:
  • Remove the seats
  • Remove the rivets
  • Take out the floor
Completed today:
  • ​Seats removed
  • Some rivets removed

Lesson learned? Maybe we were a little too ambitious for day 1.

Removing Rivets
We started our day at 8:00 AM dropping my dad off at the bus to get him back home. We then headed straight to Home Depot to buy a cone bit for the drill. We were told this would be the best way to remove the rivets. We got to the bus, tried our brand new $20 cone bit and in SNAPPED! We spent probably the first 2 hours of the day trying to figure out the best way to remove rivets. I had done research before hand, but nothing we were trying was working. We broke about 6 drill bits in the process.  We tried grinding them, but it produced so much spark it was terrifying and it wasn't working so well. Around lunch, Craig's dad came out and gave us a stronger drill and a whole set of bits he said he didn't care about. We started using a nail punch to punch through the center of the rivet. Then we took a drill bit and drilled through until the rivet spun or broke off. I'm still not convinced this is the best method. We still have tons more rivets to remove so there will be much more experimenting. 

Our friend Molly showed up around 3:00 to help out! She went to work on the rivets. I had already punched them out and she took the drill to them and the cats paw with a hammer. She killed it! She got way further than I did and got us way further ahead than we would have been without her! Go MOLLY! 

DANCE BREAK

He didn't know I was filming him. This is one of many dance breaks to come! 

Removing Seats

There was a lot of rust so removing the seats cleanly was not an option. After trying to get them out with a socket wrench and a crow bar, we decided that the grinder was going to have to do it. We ended up cutting out the seats and then using the crow bar and hammer to remove the rusted out sockets. It took most of the day to get out the 4 seats and 2 front barriers. All I could think was how glad I was there weren't 12 rows of seats! ​
Picture
Picture
End of day 1, bus cleaned out. Craig and Molly killin it!
Comments
    Picture

    Hey there! I'm Karli

    I bought a bus in October 2015 and have been working on converting it since with the help of my boyfriend Craig. We don't have any timeline for the project. We are working on it when we can and hope to get on the road someday for a grand adventure! I'll be blogging about the process along the way and sharing the details of our successes and failures to help future skoolie builders! 

    Categories

    All
    Couch
    Couch Rebuild
    Demoltion
    Design
    DMV
    Don Brown Bus Sales
    Floor Plan
    Insurance
    Purchasing A Bus
    Registration
    Removing Ceiling
    Removing Seats
    Rivets
    Road Side Insurance
    School Bus Sign Replacement
    Window Replacement
    Windows

    Archives

    October 2017
    September 2017
    August 2017
    April 2016
    January 2016
    December 2015
    November 2015
    October 2015

    RSS Feed

© 2015 - HOOPHOUSE
  • Conversion Journal